View FTR-B3GA45Z_4580287.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

uLtra MINIature
2-POLes 2a (LOW PrOFILe sIGNaL reLaY)
Ftr-B3 serIes
roHs compliant
n Features
l l l l l
l
l l
l
DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g, Mounting space: 87mm2 Adopted superior contact spring for high frequency characteristic Comply with Telcordia / FCC standard - Isolation distance: min. 1.6mm - Dielectric strength between coil and contact: 1500VAC - Surge strength: 2500V Low power: Non-latch: 140mW (230mW at 24V) Latch: 100mW (120mW at 24V) High reliable bifurcated gold overlay silver contact UL, CSA recognized. Confirms to IEC 60950, UL1950, EN60950. Spacing & high breakdown voltage (Basic insulation, 150 working volts, pollution degree 2). RoHS compliant since date code: 0431B8 Please see page 11 and 12 for more information
Ftr-B3 series
n OrDerING INFOrMatION
FTR-B3 (a) Series Name Terminal Type G B 012 Z -B (b) (c) (d) (e) (f ) 10 (g)
[Example] (a) (b)
FTR-B3 series C: through hole G: surface mount S: surface mount, space saving A: standard type B: latching type (1 coil) 1.5 : 1.5 VDC 003 : 3VDC 4.5 : 4.5VDC 006: 6VDC 009 : 9VDC 012: 12 VDC 024 : 24VDC
(c) (d)
Operation Function Rated voltage of coil
(e) (f) (g)
Contact material Relay enclosing direction* Number of relays per reel*
Z: gold overlay silver nickel (standard) P: gold overlay silver palladium B: standard enclosing direction 10: 1,000 (standard)
Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code: FTR-B3GA012Z-B10 Actual marking: B3GA012Z Note: *: - Only surface mount types (G and S) are applicable - All relays are packaged in tubes unles P/N ends with -B10
n Part NuMBers
Standard type Ordering Part Number FTR-B3CA1.5Z FTR-B3CA003Z FTR-B3CA4.5Z FTR-B3CA006Z FTR-B3CA009Z FTR-B3CA012Z FTR-B3CA024Z FTR-B3GA1.5Z FTR-B3GA003Z FTR-B3GA4.5Z FTR-B3GA006Z FTR-B3GA009Z FTR-B3GA012Z FTR-B3GA024Z FTR-B3SA1.5Z FTR-B3SA003Z FTR-B3SA4.5Z FTR-B3SA006Z FTR-B3SA009Z FTR-B3SA012Z FTR-B3SA024Z S: space saving surface mount FTR-B3 G: surface mount A: mono-stable (standard type) C: through hole Series Terminal Type Operation Coil Voltage 1.5 3 4.5 6 9 2 24 1.5 3 4.5 6 9 2 24 1.5 3 4.5 6 9 2 24
2
Contact Material
Z: Au-Ag-Ni P: Au-Ag-Pd
Ftr-B3 series
Latching type (1 coil) Ordering Part Number FTR-B3CB1.5Z FTR-B3CB003Z FTR-B3CB4.5Z FTR-B3CB006Z FTR-B3CB009Z FTR-B3CB012Z FTR-B3CB024Z FTR-B3GB1.5Z FTR-B3GB003Z FTR-B3GB4.5Z FTR-B3GB006Z FTR-B3GB009Z FTR-B3GB012Z FTR-B3GB024Z FTR-B3SB1.5Z FTR-B3SB003Z FTR-B3SB4.5Z FTR-B3SB006Z FTR-B3SB009Z FTR-B3SB012Z FTR-B3SB024Z S: space saving surface mount FTR-B3 G: surface mount B: latching C: through hole Series Terminal Type Operation Coil Voltage 1.5 3 4.5 6 9 2 24 1.5 3 4.5 6 9 2 24 1.5 3 4.5 6 9 2 24 Z: Au-Ag-Ni P: Au-Ag-Pd Contact Material
3
Ftr-B3 series
n COIL Data CHart
Nominal Voltage (VDC) 1.5 3 4.5 6 9 2 24 Max. Coil Voltage* 3.53 VDC 7.05 VDC 10.58 VDC 14.10 VDC 21.15 VDC 28.20 VDC 56.40 VDC Coil Resistance Must Operate ( 10%) Voltage*2 16.1 64.3 145 257 579 1,028 2,504 1.13 VDC 2.25 VDC 3.38 VDC 4.5 VDC 6.75 VDC 9.0 VDC 18.0 VDC Must Release Voltage*2 0.15 VDC 0.3 VDC 0.45 VDC 0.6 VDC 0.9 VDC 1.2 VDC 2.4 VDC 230 140 Nominal Power (mW)
Standard type Coil Voltage 1.5 003 4.5 006 009 012 024
Latching type (1 coil) Coil Voltage 1.5 003 4.5 006 009 012 Nominal Voltage (VDC) 1.5 3 4.5 6 9 2 Max. Coil Voltage* 3.53 VDC 7.05 VDC 10.58 VDC 14.10 VDC 21.15 VDC 28.20 VDC Coil Resistance Must Operate ( 10%) Voltage*2 22.5 90 203 360 810 1,440 1.13 VDC 2.25 VDC 3.38 VDC 4.5 VDC 6.75 VDC 9.0 VDC Must Release Voltage*2 -0.13 VDC -2.25 VDC -3.38 VDC -4.5 VDC -6.75 VDC -9.0 VDC 120 100 Nominal Power (mW)
024 24 56.40 VDC 4,800 18.0 VDC -18.0 VDC Note: All values in the table are measured at 20C. *1: No contact current at 20C. Please see 'operating range' data for other conditions. *2: Specified values are subject to pulse wave voltage.
4
Ftr-B3 series
n sPeCIFICatIONs
Item Arrangement Contact material Contact type Contact resistance (initial value ) Contact rating Contact Maximum carrying/switching current Maximum switching power Maximum switching voltage Minimum switching load *1 Nominal power (at 20 C) Coil Operate power (at 20 C) Operating temperature (no frost) Time Value Operate (at nominal voltage, without bounce) Release (at nominal voltage, without bounce ) Mechanical Life Electrical (resistive load) Vibration Malfunction resistance Endurance Other Malfunction Shock resistance Endurance Weight Standard Type FTR-B3 ( ) A 2Form C Gold overlay silver nickel / Gold overlay silver palladium Bifurcated contacts (cross-bar ) 75 m , maximum (6VDC, 1A) 30VDC 1A /125VAC 0.3A (resistive) 2A 62.5 VA / 30W 250 VAC, 220 VDC 10mVDC, 0.01mA*1 140mW to 230mW 80mW to 130mW -40 C to +85 C 3ms maximum 3ms maximum 50 x 106 ops. min. (at 3Hz) 20 x 106 ops. min. (at 3Hz) 100mW to 120mW 57mW to 68mW Latching Type FTR-B3 ( ) B
100 x 103 operations min. at 1A 30VDC (at 0.5Hz) 100 x 103 operations min. at 0.3A 125VDC (at 0.5Hz) 10 to 55 Hz at double amplitude of 3.3mm 10 to 55 Hz at double amplitude of 5mm Min. 750 m/s2 Min. 1000 m/s2 Approximately 0.8g
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
5
Ftr-B3 series
n INsuLatION
Item Resistance (initial) (500 VDC) Dielectric Strength open contacts coil and contacts Surge Voltage (coil and contact) Clearance open contacts coil and contacts Creepage open contacts coil and contacts FTR-B3 Minimum 1,000 M 1 min. 1,000 VAC (50/60 Hz) 1 min. 1,500 VAC (50/60 Hz) 1 min. 2,500 V 2 x 10s standard wave 0.28mm 1.0mm 0.28mm 1.60mm Contact rating Flammability: UL 94-V0 (plastics) 0.5A, 125VAC (resistive) 1A, 30VDC (resistive) 0.3A, 110VDC (resistive) 2A, 30VDC (resistive)
adjacent contacts 1,000 VAC (50/60 Hz) 1 min. adjacent contacts 1.0mm
adjacent contacts 1.0mm
n
UL
Type
saFetY staNDarDs
Compliance UL 508 E63615
CSA
C22.2 No. 14 LR 40304-58
n
Standard type
5
CHaraCterIstIC Data
Coil Temperature Rise (C)
Operation (return time characteristics) B3GA4.5Z n=10
Coil Temperature Rise
Nominal Voltage Multiplying Factor (%)
80
Ambient Temperature
2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0
(maximum applied voltage, operating voltage characteristics) Standard type Contact carrying current: 0 Co nta cu rre ct nt: ca 1A rryi ng
4
Time (ms)
60
3
40 Contact carrying current: 1A 20 Contact carrying current: 0 0 0 0.1 0.2 0.3
2
Operation time
1 Release 0 0.1 0.2 0.3
oltage ting v Opera il) co (hot ltage ting vo Opera ) ol coil (co
20 40 60 80 100
Coil Power (W)
Coil Power (W)
Ambient Temperature (C)
Maximum Switching Power
2 AC Resistive
100 70
Life Curve
Contact Current (A)
1
Operation (x104)
50 40 30 20
30
0.5 DC Resistive 0.3 0.2
VD C
Re sis
12 5V DC Re
tiv
e
10
sis tiv e
0.1
1
2
5
10
20 30 50
100 200
0
0.2
0.4
0.6
0.8
1.0
1.2
Contact Voltage (V)
Contact Current (A)
6
Ftr-B3 series
5
Latching type (1 coil)
Distribution (%)
4
FTR-B3GB4.5Z n=10 Operation time Release
90 80 70 60 50 40 0.5
FTR-B3GB4.5Z n=10
3
2
set/reset
Coil Temperature Rise (C)
Operation (return time characteristics)
100
Pulse Characteristics
80
Coil Temperature Rise
Time (ms)
60
40 Contact carrying current: 1A Contact carrying current: 0 0 0.1 0.2 0.3
20
0
0
Coil Power (W) Ambient Temperature
Co cu nta rre ct nt: ca 1A rryi
0.1
0.2
0.3
Time (ms)
5
10
50 100 200
0
Coil Power (W) Life Curve
Nominal Voltage Multiplying Factor (%)
(maximum applied voltage, operating voltage characteristics)
2 Latch
Maximum Switching Power
AC Resistive
100
Contact Current (A)
2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0
ng
0.5 0.4 0.3 0.2
DC Resistive
Operation (x104)
Ambient Temperature (C)
oltage ting v Opera il) o (hot c ltage ting vo Opera ool coil) (c 20 40 60 80
n
Standard type
100
reFereNCe Data
Distribution of Operate and Release Voltage
FTR-B3GA4.5Z n=100 Operate Release
100
Distribution (%)
80
Distribution (%)
80
Distribution (%)
ry ar tc ac 0 nt nt: Co rre cu
50 40 30 20
in g
30 VDC Resistive
10
125 VDC Resistive
0.1 100
0
Contact Voltage (V)
5
10
30 50
100 200
0
0.2
0.4
0.6
0.8
1.0
1.2
Contact Current (A)
Distribution of Operate and Release Time
FTR-B3GA4.5Z n=100 Operate Release
Distribution of Bounce Time
100 FTR-B3GA4.5Z N=100 Operate Release
80
60
60
60
40
40
40
20
20
20
Nominal Voltage Multiplying Factor (%)
0
10
20
30
40
50
60
70
80
0
0 1
1
2
3
4
5
Time (ms)
2
3
4
5
Time (ms)
7
Ftr-B3 series
Nominal Voltage Nominal Voltage Multiplying Factor (%) Multiplying Factor (%)
100
Distribution (%)
80
FTR-B3GA4.5Z n=100 Make Break
20 10 0
Magnetic Interference
FTR-B3GA4.5Z n=4 Operating Voltage Standard type
Nominal Voltage Nominal Voltage Multiplying Factor (%) Multiplying Factor (%)
Distribution of Contact Resistance
20 10 0
Magnetic Interference
FTR-B3GA4.5Z n=4 Operating Voltage
Standard type
60
-10 -20 20 10 0 Release Voltage When coil is ON When coil is OFF
-10 -20 20 10 0
40
20
-10 -20 0 2
-10 -20 0 2
Release Voltage
When coil is ON When coil is OFF
0
Contact Resistance (m)
20
40
60
80
100
Distance between relays I (mm)
4
6
8
10
Distance between relays I (mm)
4
6
8
10
High Frequency Characteristics
150 FTR-B3GA4.5Z n=2 FTR-B3GB4.5Z n=2
High Frequency Characteristics
1.8 1.6 FTR-B3GA4.5Z n=2 FTR-B3GB4.5Z n=2
Insertion Loss (dB)
1.4 1.2 1.0 0.8 0.6 0.4 0.2
100
Isolation (dB)
50
0
0
1
3 5 7 10
Frequency (MHz)
30 50 70 100
300 500 700 1000
1
3 5 7 10
Frequency (MHz)
30 50 70 100
300 500700 1000
100
Latching type (1 coil)
Distribution of Operate and Release Voltage
FTR-B3GB4.5Z n=100 Operate Release
Distribution of Contact Resistance
100 90 80 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100 FTR-B3GB4.5Z n=100 Make Break
150
High Frequency Characteristics
FTR-B3GB4.5Z n=2
90 80
Distribution (%)
Distribution (%)
60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80
Isolation (dB)
70
100
50
0
Nominal Voltage Multiplying Factor (%)
1.8 1.6
Contact Resistance (m)
Frequency (MHz)
0
100
1000
High Frequency Characteristics
FTR-B3GB4.5Z n=2
Insertion Loss (dB)
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0
Frequency (MHz)
0
100
1000
8
Ftr-B3 series
n DIMeNsIONs
l Dimensions
10.6
0.2
FTR-B3C( )( )( ) - Through hole type
7.2
0.2
0.5 0.05
0.4 +0.2
(1.5) 3.2 0.2 2.2
0.2
2.2
0.2
5.080.2
l Mounting Pad (TOP VIEW)
8-O 0.85
l Wiring Diagram (TOP VIEW)
(-) 8
7
6
5.0 8
1 (+)
3.2 2.2 2.2
2
3.5 +0.3 -0.2
5 3 4 Marking (Coil side indication)
5.2 0.02
Unit: mm
FTR-B3G( )( )( ) - Surface mount type (standard)
l Dimensions
10.6
0.2
7.2
0.2
0.2 +0.2
0.4 +0.2
(1.5) 3.2 0.2 2.2
0.2
2.2
0.2
5.080.2 8.2 +0.5 -0.3
l Mounting Pad (TOP VIEW)
2.56
0.8
0.8
0.8
0.8
l Wiring Diagram (-) (TOP VIEW) 8
7
6
5
6.64
3.2
2.2
2.2
1 2 3 (+) Marking (Coil side indication)
2.56
4
5.45 +0
1.05
Unit: mm
9
Ftr-B3 series
n DIMeNsIONs
FTR-B3S( )( )( ) - Space saving type
l Dimensions
10.6
0.2
7.2
0.2
0.2 +0.2
0.4 +0.2
(1.5) 3.2 0.2 2.2
0.2
2.2
0.2
l Mounting Pad (TOP VIEW)
0.8 0.8 0.8 0.8
l Wiring Diagram (TOP VIEW)
5.080.2 7.2 +0.5 -0.3
(-) 8
7
6
5
2.08
6.14
2.08
1 (+)
3.2 2.2 2.2
2
3
4
Marking (Coil side indication)
5.45 +0
1.05
l Packaging Orientation Code:B
Unit: mm
n
PaCKaGING sPeCIFICatIONs
l Packaging Method - Packaging Standard: JIS C 0806 - Taping Type: TB 1612 - Reel Type: R16D - Quantity of 1reel: 1000 pieces
Orientation mark side
Feeding
l (2) Dimensions - Reel dimensions
l Tape Dimensions
Top cover tape
Embossed carrier tape
Unit: mm Note: Relays are sold in packs of 1000 pieces, please order 1000 pieces as one unit.
10
Ftr-B3 series
n reCOMMeNDeD sOLDerING CONDItIONs FOr sMt (teMPerature PrOFILe)
IRS (Infrared Reflow Soldering) VPS (Vapor Phase Soldering)
Temperature (C)
T3 T2 T preheating
T 3 = 250C max. T 2 = 220C max. cooling T = 130C max.
Temperature (C)
soldering
T3 T2 T
215C maximum soldering cooling preheating
T 3 = 200C maximum T 2 = 165C maximum T = 100C maximum
0
120 sec maximum
30 sec Max.
0 60 sec Max.
60 sec Max. 90 sec Max.
Note: 1.Temperature profiles show the temperature of PC board surface. 2.Please perform soldering test with your actual PC board before mass production, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method.
n
PreCautIONs
- For details on general precautions, refer to the section on technical descriptions. - Since this is a polarized relay, follow the instructions of the internal wiring diagram for the connections of the coil. - Note that the terminal layout and internal wiring of the surface mount relay are a top view
Ftr-B3 series
roHs Compliance and Lead Free relay Information
1. General Information
If applicable, relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder plating currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward Sn-3.0Cu-Ni will be used for the FTR-B3 and FTR-B4 series relays. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE, decaBDE and PFOS). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l "LF" is marked on each outer and inner carton. (No marking on individual relays). l To avoid lead containing relays (for lead-free sample, etc.) please consult with area sales office. l We will ship lead containing relays as long as the lead containing relay inventory exists, if allowed. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
2. Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-3.0Ag-0.5Cu or Sn-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from February 2005.
Reflow Solder condition
Peak Temp.: max. 250C 250 temperature (C) 220 Pre-heating Cooling Soldering
Flow Solder condition:
Pre-heating: Soldering:
maximum 120C dip within 5 sec. at 260C solder bath
Solder by Soldering Iron:
170 130
Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec.
90~120 sec. max. 120 sec.
20~30 sec. (duration)
We highly recommend that you confirm your actual solder conditions
3. Moisture sensitivity
l
Moisture Sensitivity Level is not applicable to electromechanical relays. SnAgCu and SnCuNi solder are known as low risk of tin whisker. No considerable whisker length was found by our in-house test.
2
4. tin Whisker
l
Ftr-B3 series
Fujitsu Components International Headquarter Offices
Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and south america Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/relays/ europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/
(c)2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. September 11th, 2009.
13

▲Up To Search▲

Price & Availability of FTR-B3GA45Z

	To Download FTR-B3GA45Z Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .